Cold Air Induction Systems - SS Inductions - Ford Products


Menu
Big Mouth™ Cold Air Inductions
How does it work?
Product Range


Introducing the Big Mouth™ cold air inductions...Get your engine breathing right with the BIG MOUTH™ range of proven products for your Ford
 

You drive into high-pressure air - try putting your arm out the window at even 60kph.

SS Inductions' cold air systems are designed to channel that air directly into your car's standard airbox with minimal pressure loss.

The Big Mouth range combines a larger induction and larger entry into the airbox. This allows the engine to breathe in a greater volume of air at all engine speeds, right across the rev range.

Most models include our unique aluminium air scoop, which increases the ramming effect at highway speed from the additional air it deflects into the induction from the large grill area.

These features ensure maximum delivery of cold air to the motor at all times, at all speeds, for all models (from EF onwards).

SS Inductions' cold air systems are manufactured from high quality plastics that have an original factory look. They feature a smooth Internal shape for a less disruptive airflow. Generally there Is no cutting or drilling of body panels required. The standard opening to the airbox on all models must be enlarged as part of the D.I.Y. fitting process.

Top of Page


 

How does it work?

There's no rocket science involved - It's a simple matter of getting cool air into your engine faster and more efficiently.

Cool air is mandatory for optimum performance as it contains more oxygen than warm air and is denser, resulting in better combustion (Note how much better your car runs at night or early morning).

The faster you can make this air flow to your engine the better it will perform. All vehicles have a factory induction however most are undersized and very restrictive. More often than not they are poorly situated so that there is no ramming effect and your engine is left to breathe in hot turbulent air from within the engine bay. This results in poor performance and economy.

The solution is to ram cool air from outside the engine bay. The combination of ramming cool high-pressure air directly to the engine with minimal disruption gives greater efficiency at all engine speeds.

Greater efficiency from a cold air induction means more power, better fuel economy, smoother performance, improved acceleration and enhanced overall drivability!

Top of Page


THROTTLE BODY:
CNC Billet Aluminium Big Mouth™ Throttle Body with 80mm butterfly has huge increase over standard 75mm. Delivers greater torque and throttle response through the entire rev range. Expect an increase of up to 10kW at the rear wheels. Non-exchange item - enables original equipment to be retained.
COMPUTER COVER:

Stylish cover fits over computer housing.
ENGINE COVERS:
The three-part engine cover to enhance the Boss V8 motor are made from high-heat plastic and feature protective heat shield and bracing. Available in black (textured finish) or colour-coded (smooth gloss finish) to match your car. Note that the kit also includes the Computer Cover that fits over the computer housing.
COLD AIR INDUCTION:

This Big Mouth™ induction improves all Boss V8 models. The five-part kit features plastic induction unit, huge intake to connect to the airbox, a bracket to relocate the power steering bottle and two of the unique aluminium air scoops. These scoops increase the ramming effect at highway speeds and ensure maximum delivery of cold air to the motor from the grill area. Expect up to 13kW increase at the rear wheels.

BIG MOUTH™ HIGH PERFORMANCE FILTERS:
Long life washable pod filter with superior airflow and maximum filtration. Recommended for use with all SS Inductions' systems. Manufactured by Kingdragon®.
 
GAUGE HOLDER (Pictured Left):
This great looking gauge holder is designed to hold two gauges and is mounted on the top of the centre dash. Available in black with a textured or smooth finish.

Top of Page


Product Range

EF - AU 6cyl & V8
COLD AIR INDUCTION:

Standard system, including Tickford, is about 3 times smaller with restrictive entry to the airbox.
The Big Mouth™ two-part kit consists of plastic induction unit and smooth plastic connecting intake. This chucky induction rams extra air through a larger opening into the standard airbox.
Expect up to 7kW at rear wheels, smoother performance, more responsive throttle and a considerable fuel saving.

AU XR6 & XR8
COLD AIR INDUCTION (Part # CA1009):

Standard system, including Tickford, is about 3 times smaller with restrictive entry to the airbox.
The Big Mouth™ three-part kit consists of plastic Induction unit, smooth plastic connecting intake and the unique SS Inductions' aluminium air scoop. This scoop increases the ramming effect at highway speed and ensures maximum delivery of cold air to the motor from the grill area. The chunky induction rams extra air through a larger opening In the standard airbox.
Expect up to 9kW at rear wheels, smoother performance, more responsive throttle and a considerable fuel saving.

OTHER PRODUCTS AVAILABLE
Big Mouth
High Performance Filter (Part # PAF004):
Long life washable filter with superior airflow and maximum filtration. Recommended for use with all SS Inductions' systems. Manufactured by Kingdragon.

Ignition Leads (Part # HPL005-9):
9mm Spiral Wire - lower resistance than standard leads hence stronger spark for better performance and economy. Available for 6cyl only.

Modified Throttle Body (Part # PTBOD2-3, 6-7):
The modified throttle body with larger butterfly and unrestricted airflow capabilities offer a great Improvement in throttle response and added power. Expect up to 5kW increase at rear wheels. Available for AU 6cyl only.
BA 220kW V8
COLD AIR INDUCTION (Part # CA1012):
Standard system Is at least 4 times smaller with restrictive access to airbox. The Big Mouth
five-part kit consists of plastic Induction unit, plastic connecting Intake, a bracket to relocate the power-steering bottle and two of the unique SS Inductions' aluminium air scoops. These scoops Increase the ramming effect at highway speed and ensure maximum delivery of cold air to the motor from the grill area. Expect up to 11kW at rear wheels, smoother performance, more responsive throttle and a considerable fuel saving.

OTHER PRODUCTS AVAILABLE
Throttle Body <Part # PTB008/9):
CMC Billet Aluminium Big Mouth
Throttle Body with 75mm (6cyl) or 80mm(V8) butterfly has huge increases over standard 70mm (6cyl) or 75mm(V8). Delivers greater torque and throttle response through the entire rev range.
Expect an increase of up to 8kW (6cyl) and 10kW (V8) at the rear wheels. Non-exchange item - enables original equipment to be retained.

Top of Page

Big Mouth™ High Performance Filter (Part # PAF006):
Long life washable filter with superior airflow and maximum filtration. Recommended for use with all SS Inductions' systems. Manufactured by Kingdragon.

Computer Cover (Part # CPCC01):
This stylish cover fits over the computer housing to enhance the under-bonnet appearance and is available in
black plastic.

Gauge Holder (Part # DGH001/2):
This great looking gauge holder is designed to hold two gauges and is mounted on the top of the centre dash. Available in black with a textured or smooth finish.

Top of Page


© Performance Exhaust 2008 | Site by GeNeR@L Designs